E-MAX Instruments 
RTP-1 Monitor / Annunciator
| Part Number | Type | Input Power |
| 101D140 | RTP-1 | 125 Vdc |
| 101D141 | RTP-1 | 48 Vdc |
| 101D142 | RTP-1 | 250 Vdc |
| 101D143 | RTP-1 | 120 Vac |
Related Products
Overview
Specifications
Dimensions
RTP-1 Monitor / Annunciator
- Low Power
- Latched memory
- Single System Test Switch
- Front Panel Reset Switch
- Rack Mount Chassis
The RTP-1 Monitor is a general purpose annunciator. Designed for 19 “ rack installations, the RTP-1 is complete with a noise immune filter. The ten point RTP-1 features latching memory. Easy to install and easy to operate, this low power monitor has front panel plug-in replaceable LEDs for indication and a single system Test and Reset buttons.
| Number of Points | 10 |
| Input Power | 48 Vdc |
| 125 Vdc | |
| 250 Vdc | |
| Input Contact Type | Normally Open |
| Contact Rating | 125 Vdc 0.5 A resistive |
| Outputs | Visual Indication |
| Plug-in replaceable Red LED (note polarity when changing LED) | |
| Point Identification | Adhesive backed black laminate/white core nameplates (optional) |
| Nameplate dimension 1.00 x 0.63 (dimension in inches) | |
| Engraving of Nameplates available upon request | |
| Fuse | 1 A Type: 3AG |
| Isolation | Point to Point |
| Point to Ground | |
| Environmental | |
| Operating Temperature | -20 to 55 C |
| Storage Temperature | -55 to 70 C |
| Surge Withstand | ANSI/IEEE C37.90a-1989 Surge Withstand Capability |
| Dimensions | 19.0 w x 1.75 h x 4.0 d (dimensions in inches) |
| Contact Wiring | Field contact wiring for points 1-5 is made on TB1, points 6-10 on TB2. Input power is connected to TB1. All terminal blocks are mounted on the rear panel of the RTP1. |
