E-MAX RSA-8 Shunt

The RSA-8 Recording Shunt Assembly contains eight individual shunts with terminal block programming for either a current channel (using the shunt) or bypassing the shunt and using a dropping resistor for conversion to a voltage channel.

The shunts have 2500 V rms isolation from each other and from ground. Each shunt is an individual loop of Evanohm wire. This wire is the standard of the ultra-precision resistor industry. However, with nominal values of 100 milliohms ± 5%, the shunts are not intended for metering purposes.

The loop is supported mechanically to prevent distortion during large overload conditions.